Hard wearing and durable adhesive promoted acrylic sheen emulsion, a wall coating which impart a beautiful velvet sheen to interior surface. Making the ideal finish for high traffic areas and keeping the velvet sheen beautiful for years to come.

Colours Available:

Standard white available which can be tinted to any pastel colour at your nearest dealer.

Product information

– Pack size: 1L, 5L and 20L
– Spreading Rate : ± 10 square meters /L
– Repels water and will not soften or peel off
– Quick drying
– Sheen finish
– Water-based
– 20 000 + Shrubs tested by independent laboratory
– 5 – 7 year life expectancy provided the product is correctly applied

Surface Preparation

Surface should be in sound condition, dry and free from loose material. Dirt and grease should be removed by washing with a warm detergent solution (sugar soap) and then rinsing with clean water. Allow to dry thoroughly. All areas to be sanded properly. Never paint over surfaces on which the paint is failing, the area in between which seems to be sound are already weak and will soon fail. The new paint will tend to pull the old system. New plaster should be coated with GC Coatings First Coat.

Fill all deflect with the appropriate product.

N.B: Prime, seal and sand according to instructions on the pack.

Product Application

Stir before use. Apply GC Coatings Sheen evenly by brush or roller. To ensure a good film of paint avoid overspreading. Apply two coats to achieve complete obliteration. Allow five hours drying time between coats. Clean equipment with tap water.