A durable water-based texture coating for exterior cement plastered walls.

Colours Available:

Standard colour: White. Can be tinted.

Product information:

– Pack size: 5L and 20L.
– Spreading rate ± 5 square meters/L – depending on surface texture.
– Water-based.
– Matt finish with a fine texture.
– UV resistant.
– Reduces dampness on building walls.
– Hides minor surface irregularities like hairline cracks.

Surface Preparation:

Surfaces should be in sound condition, dry & free from loose material. Dirt and grease should be removed by washing with a warm detergent solution (sugar soap) and then rinsing with clean water. Allow to dry thoroughly. All areas to be sanded properly.

Lime washed and chalky surfaces should be thoroughly cleaned, sanded and primed with GC Coatings Bonding Liquid before painting.

Fill all defects with the appropriate product. N.B. Prime seal and sand according to instruction on the pack.

New plaster should be coated with GC Coatings First Coat.

Product application:

Stir thoroughly with a flat paddle.
Apply final coat evenly by brush or roller.
Apply two coats to achieve completely obliteration.
Allow 4 hours drying time between coats.
Clean equipment with tap water.
Insure that the same batch is used, colour might differ from batch to batch.